Know what’s happening
Access the private noticeboard for verified neighbours near you. Keep informed about any suspicious activity, send urgent updates to your neighbours when required and discuss emergency planning.
Get to know your neighbours
Browse the directory and start getting to know your neighbours. Don’t want to post to the whole neighbourhood? Send a private message.
Buy, sell and give away
Want to declutter your garage? Buy some used household items? Give away some garden stuff? Become a verified neighbour to browse and post items for sale. Trading is simple when everyone lives nearby.
Nearby
Normandale, Woburn, Alicetown, Epuni, Hutt Central, Tirohanga, Maungaraki, Waterloo, Waiwhetu, Petone, Boulcott, BelmontGot a question about your lawn or backyard?
Ask a Crewcut Lawn & Garden expert (and an ex-Black Caps coach!) now. Head here.
Thank you for using Neighbourly
You may receive an email confirmation for any offer you selected. The associated companies will contact you directly to activate your requests.
Reporter Community News
The first of Lower Hutt’s new rubbish and recycling bins are being delivered to residents this week ahead of the upgraded kerbside rubbish and recycling service starting 1 July.
Approximately 120,000 wheelie bins for rubbish and recycling, and crates for glass are being delivered in stages to … View moreThe first of Lower Hutt’s new rubbish and recycling bins are being delivered to residents this week ahead of the upgraded kerbside rubbish and recycling service starting 1 July.
Approximately 120,000 wheelie bins for rubbish and recycling, and crates for glass are being delivered in stages to just over 40,000 households across the city. Households will also receive their green waste bins if they chose this service.
Lower Hutt Mayor Campbell Barry says this is an exciting milestone for the upgraded service, which will ultimately bring Lower Hutt’s rubbish and recycling kerbside service into the 21st century.
Robert Anderson from Curtain Clean (The Curtain Store)
From a dog’s point of view, blinds are just an obstacle keeping them from the window. When there’s a something outside, the blinds just become a casualty of the resulting frenzy to get out there. Keep blinds raised part-way to allow your pup to see out and avoid wreckage. Avoid this issue by … View moreFrom a dog’s point of view, blinds are just an obstacle keeping them from the window. When there’s a something outside, the blinds just become a casualty of the resulting frenzy to get out there. Keep blinds raised part-way to allow your pup to see out and avoid wreckage. Avoid this issue by teaching your dog to stay calm in exciting situations.
Many dogs, especially as puppies, will chew on anything in sight. If your blinds have become your pets teething stick, it’s because he doesn’t have anything else to chew on. Deter dogs from gnawing on blinds by spraying slats with sour apple spray (available at pet stores). It smells and tastes terrible to dogs but is neutral to humans.
When you’re away from home, keep your dog in a safe room and give them special toys that are otherwise hidden away. Treat-filled toys and meat flavoured bones are especially appealing. With these toys to keep them preoccupied, they won’t think twice about the blinds.
Dogs can be like children, they have a lot of energy and it will find a way out whether you provide it or not. With this in mind, give your dog an opportunity to tire themselves out and your home might not become a race track.
What are the pet-friendliest window dressings?
Try vertical blinds. Furry friends can nudge slats out of the way to see out the window and they’ll fall back into place afterwards. If pets chew on blind slats, you can order individual replacements instead of getting a whole new set. If pet hair and grime are a problem, just wipe them clean with soap and water.
Keep reading: www.curtainclean.co.nz...
Kylie from Hutt City Libraries
Grab yourself a bargain book at our big book sale.
We've got hundreds of items for sale from across our collections, covering all interests!
20-22 May at the War Memorial Library during opening hours.
We are expanding our factory and looking for people to join our team.
We’re looking for anybody with manufacturing or machine operating experience. Experience in the steel industry is preferred but not necessarily required as we will provide on the job training. Key attributes we are looking … View moreWe are expanding our factory and looking for people to join our team.
We’re looking for anybody with manufacturing or machine operating experience. Experience in the steel industry is preferred but not necessarily required as we will provide on the job training. Key attributes we are looking for are a positive attitude, safe working mindset, good communication skills and demonstrated reliability.
We love to look after our staff and offer:
- Industry leading pay rates
- Opportunity for day or night shift (night shift loading rate paid)
- Brand new machinery
- Supportive team environment
- Great benefits including free gym membership, health and life insurance
Apply now
It’s a time for fine-tuning your skills and pushing the boundaries, catching up with your mates and heading off on new adventures at the drop of a hat! No, we’re not talking about your 20s, we’re talking about your retirement.
Ross’ retirement saw the beginning of his musical journey … View moreIt’s a time for fine-tuning your skills and pushing the boundaries, catching up with your mates and heading off on new adventures at the drop of a hat! No, we’re not talking about your 20s, we’re talking about your retirement.
Ross’ retirement saw the beginning of his musical journey where his passion quickly evolved from making music, to crafting guitars. It all started when Ross and some mates joined a music group where the camaraderie and togetherness were just as important as the music.
Living in a Ryman village, Ross can continue living life to the full in his retirement because they are places where you don’t retire from life, you find a new way to live .
Learn more
Reporter Community News
This week we feature a cat called Simba. Who belongs to Dean Cooper from Masterton.
"Simba is around 27 years old and although starting to loose weight, is still going strong!
Remember if you want your pet featured on Neighbourly, email us on yourpet@dompost.co.nz with a recent photo. Please … View moreThis week we feature a cat called Simba. Who belongs to Dean Cooper from Masterton.
"Simba is around 27 years old and although starting to loose weight, is still going strong!
Remember if you want your pet featured on Neighbourly, email us on yourpet@dompost.co.nz with a recent photo. Please remember to say what suburb you live in.
42 replies (Members only)
Reporter Community News
It has been a rough two years for Dolly the collie. The problems with Dolly’s limbs began when she was 10, resulting in the surgery on three of her four lower limbs. Her fourth limb may require surgery in the future.
Over the last two years owner Alla Baider has spent $25,000 trying to keep her … View moreIt has been a rough two years for Dolly the collie. The problems with Dolly’s limbs began when she was 10, resulting in the surgery on three of her four lower limbs. Her fourth limb may require surgery in the future.
Over the last two years owner Alla Baider has spent $25,000 trying to keep her beloved pet mobile.
Dolly has an empathy with people, that really shone through the Covid lockdown, she said.
“On top of her good looks and winning smile, Dolly has a supernatural sense for whenever someone is feeling down or in pain. It’s impossible to still be upset after receiving a warm hug from her.”
Jenny from Hutt Central
Do you have your winter hobbies sorted? Do you have basic knitting skills but would like to learn more? This might just be for you!
This is a Block of workshops for those who already know how to knit but would like to learn more.
If you have have a good understanding of the basics of knitting but … View moreDo you have your winter hobbies sorted? Do you have basic knitting skills but would like to learn more? This might just be for you!
This is a Block of workshops for those who already know how to knit but would like to learn more.
If you have have a good understanding of the basics of knitting but would like to learn some more advanced techniques then this is the group for you!
Workshops start on the 8th/9th of June
Each block is a set of five fun workshops run in groups of no more than five people.
In your 1st workshop you will receive a starter pack which includes everything you need to complete the Block of Workshops. So no need rush out and get needles and yarn, just bring yourself!
In each workshop you will create a peggy square using the skills you are learning in that session. You will be provided with an instruction sheet which will be yours to keep.
By the time you have completed the Block 2 you will have four instruction sheets and a pattern to keep. You will make a hat using circular needles.
Each Workshop includes nibbles and a drink.
How Much Does A Block Cost?
Workshop 1 Faux Cable $95
(That's the Cost of your workshop $40, plus your Starter Pack
valued at up to $65.)
Workshop 2 Cable $40
Workshop 3 Time to Catch Up $40
Workshop 4 Working with Colour $40
Workshop 5 A lace Pattern $40
Add these up and the total Cost for Block 2 is $255
That's five 1.5 hour sessions.
As there is a limit of 5 people per group you will need to register,
to do this please email createdbycraftychick@gmail.com
to request a registration form. Please note you are registering for all 5 workshops.
Workshops are run in Central Lower Hutt, address will be given upon
confirmation of registration.
If you would like further information please email
createdbycraftychick@gmail.com
www.meetup.com...
Reporter The Hutt News
Kia ora neighbours,
Have you had water supply cut off as a result of burst water mains? What other water problems are prevalent in your community?
Wellington residents are filing more than 50 complaints a day regarding the capital's ageing water infrastructure.
One leak near the … View moreKia ora neighbours,
Have you had water supply cut off as a result of burst water mains? What other water problems are prevalent in your community?
Wellington residents are filing more than 50 complaints a day regarding the capital's ageing water infrastructure.
One leak near the Prime Minister's official residence in Tinakori Road has not been fixed since being first reported in September 2020.
Wellington Water spokesman Alex van Paassen says that some longer running leaks may not be showing up in data searches.
"Sometimes they get fixed but other nearby leaks are still going; sometimes the fix doesn't work, or a new leak pops up at the same place; sometimes they're private – private leaks can get into the neighbours at war territory," he said.
Van Paasen said that there were several reasons for the delayed fixes including Wellington Water's aging workforce, lack of skilled workers and an increase in work volume.
A presentation was delivered to Wellington City councillors in late-2020 showed that almost half of the cities pipes needed replacing, with $578 million needed to clear a variety of other accumulated issues.
Share your thoughts below and don't forget to type NFP if you don't want your comment featured in The Hutt News.
At New Vision Enterprises we pride ourselves in providing quality and professional workmanship. We are a locally owned family business that offers multiple services (Plumbing, Drainage, Bathroom Renovations, and more!)
Our team of licensed professionals provide service based on quality, … View moreAt New Vision Enterprises we pride ourselves in providing quality and professional workmanship. We are a locally owned family business that offers multiple services (Plumbing, Drainage, Bathroom Renovations, and more!)
Our team of licensed professionals provide service based on quality, honesty, integrity, appearance, and communication. NVE offers a full workmanship guarantee on all work completed.
Kapiti, Karori, Kilbirnie, to the Hutt Valley - we cover the Greater Wellington Region.
Give us a call. We’re here to help! 04 479 4181
Learn more
Reporter Community News
"I was a stray mum with kittens before coming to the SPCA.
Here's what my foster mum has to say about me:
Charlotte is a sweet wee girl, gentle and friendly with kittenish spirit coming through from time to time. She was initially nervous in her new environment, but patience and gentle … View more"I was a stray mum with kittens before coming to the SPCA.
Here's what my foster mum has to say about me:
Charlotte is a sweet wee girl, gentle and friendly with kittenish spirit coming through from time to time. She was initially nervous in her new environment, but patience and gentle encouragement has seen her become playful and sociable.
She likes being patted but isn't too fussed on being picked up and held (although this is improving) and isn't a lap cat at the moment. She spends some of her time in other rooms around the house but mostly likes company and comes when called.
She is an early riser and when she wants something can be quite vocal. She loves playing with small toys and moving things and gets quite absorbed watching action programmes on tv. A warning though, she loves electrical cables. She is a well adapted and house trained cat, and surprisingly, given her underlying nervousness, isn't scared of the vacuum cleaner, however I don't think she will like a rowdy household."
Nance from Alicetown
Oil filled radiator- runs well .
On wheels so can be moved around. Pick up in Fairfield.
Negotiable
Robert Anderson from Curtain Clean (The Curtain Store)
Window insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. … View moreWindow insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. They cost a fraction of the price of double glazing yet offer good performance in reducing heat loss and condensation in your home, as well as preventing your sills and window dressings from going mouldy. You can pick up a kit from your local Mitre 10 or Bunnings.
Window insulation film is only designed to last one season, but it may remain intact for several years if your windows are in good condition and the film is undisturbed. Just be aware that adhesive tape used on the film may leave a stain if you leave it on for longer than one season.
Tips for installing
Installing DIY window insulation film is relatively easy – you only need a pair of scissors and a hair dryer.
• Make sure your window frames are dry and the paint is in good condition to avoid condensation forming inside the air gap.
• For wooden windows, applying a bead of sealant like silicone along the glass edge will further reduce the risk of moisture creeping into the air gap.
• Make sure your window pane is clean and streak free before putting the insulation up.
Step 1: Clean the Window
Clean the window thoroughly with an ammonia-based window cleaner and wipe it dry using a squeegee. Make sure that all of the window cleaner is wiped off, as it will dissolve the adhesive on the window film.
Step 2: Wet the glass with a light spray of water and baby shampoo
Fill a spray bottle with water and add a couple of drops of baby shampoo. Spray the mixture onto the window. This mixture helps the film stick to the window but still lets you slide the film around so you can fit it properly into the corners before the mixture dries.
Step 3: Measure and trim the film to size
Measure the window to see how large an area you need to cover, allowing at least two centimetres overlap for all four sides. Roll the window film out onto a flat horizontal surface and trim to size. Before you put the film on the window, start peeling the backing off the sticky side of the film. Use masking tape on both sides of one corner to get the peeling started.
Step 4: Put the window film onto the window
Once you’ve peeled off the top five to ten centimetres of backing, move the film up to the surface of the window. Start by putting the top two corners in place. Once the film is sitting in a good position you can slowly start to take the rest of the backing off.
Step 5: Remove the backing from window film as you go
Slowly peel the backing off in stages. Use a squeegee to flatten the film out onto the window as you go. Start the squeegee in the centre of the window and push out to the edges. As you work down the window, use the spray bottle to keep the surface as moist as possible. It will give you a much smoother finish.
Step 6: Remove the air bubbles from the window film
Once the squeegee has got the larger bubbles out, use the small plastic scraper to remove any smaller bubbles. You can work out any small pockets of water at the same time. Whatever small amounts of moisture are left will work with the adhesive on the film to create a bond to the window.
Step 7: Give the window film a final trim
When all the bubbles are out, take a sharp blade and give the film a final trim at the edges of the window. Once you’ve trimmed the edges, give the film one final scrape with the small plastic scraper. Tuck the corners in as hard as you can, squeegeeing towards the outside, working out the last remnants of water.
Mei Leng Wong Reporter from NZ Gardener & Get Growing
They had a vision for their property, but they also had three floods in 20 years. That didn't stop them pursuing the garden of their dreams though.
Reporter Community News
Cashed-up boat buyers unable to travel are thought to be behind a spike in demand for berths that has resulted in a million-dollar expansion at a Lower Hutt marina.
Seaview Marina is putting the finishing touches on a $1.2 million 46-berth extension and has plans to install an additional 31 which … View moreCashed-up boat buyers unable to travel are thought to be behind a spike in demand for berths that has resulted in a million-dollar expansion at a Lower Hutt marina.
Seaview Marina is putting the finishing touches on a $1.2 million 46-berth extension and has plans to install an additional 31 which will allow the docks to hold more than 400 vessels.
Chief executive Alan McLellan says the marina is at capacity and a waiting list for spots has grown over the last couple of years.
McLellan said Seaview was the biggest marina in the region and the only one with the ability to expand. Once the new berths were built, there would be no room for more.
Loading…
Are you sure? Deleting this message permanently removes it from the Neighbourly website.
Loading…
© Neighbourly 2024