Nearby
Hillcrest, Melville, Hamilton Central, Hamilton Lake, Temple View, Hamilton East, Frankton, Bader, Fitzroy, Dinsdale, Glenview
Thank you for using Neighbourly
Check out our RetroFit Double Glazing - vimeo.com... |Healthier Home
video| Wanting a healthier home this winter? Enjoy the many benefits retrofit double glazing has to offer. Reduced condensation, reduce cold, reduce noise and reduce heating costs. Get your free measure and quote now or call us … View moreCheck out our RetroFit Double Glazing - vimeo.com... |Healthier Home
video| Wanting a healthier home this winter? Enjoy the many benefits retrofit double glazing has to offer. Reduced condensation, reduce cold, reduce noise and reduce heating costs. Get your free measure and quote now or call us on 0800 658 658
HAMILTON RESIDENTS AND RATEPAYERS ASSOCIATION (HRRA) OPINION PIECE
Hamilton Residents and Ratepayers (HRRA) support improvements in the city where appropriate consultation is carried out with the community and best practise cost benefit analysis, is firstly undertaken, and then peer reviewed by … View moreHAMILTON RESIDENTS AND RATEPAYERS ASSOCIATION (HRRA) OPINION PIECE
Hamilton Residents and Ratepayers (HRRA) support improvements in the city where appropriate consultation is carried out with the community and best practise cost benefit analysis, is firstly undertaken, and then peer reviewed by independent experts. Once projects are completed, decision makers must be held to account for unsatisfactory outcomes.
We voted in Elected Members to be the liaison between Council plans and the community; openly discussing the tangible benefits and associated risks. In so doing, the community can decide for themselves whether they support a proposal, or not. Currently, and for some time, we feel that elected members have not communicated openly with the community nor actively listened to their opinions and expertise. This is not democracy.
In the Hamilton City Council’s ‘back on track’ budget, we do not see any real attempts to deal with major cost blowouts, tighten the belt, or reduce the burden on ratepayers of the covid-19 recession. Stephen Tindall in an open letter to the world (reported by stuff on Jul 14 2020) said “… the economic impact would ‘last for decades’ and could push more than half a billion people into poverty”. Sections of the community are already struggling financially, experts forecast a significant economic downturn and the loss of livelihoods. Tinkering around the edges will not fix this. Our Council does not seem to be taking the issue seriously.
The last thing Hamilton needs is family poverty, in part driven by out-of-control rate increases. Hamilton Council’s 3.8% rate increase is indicative of an organisation, that we believe, is out-of-control. Those at the top are apparently unable to address long-term systemic cost spirals.
Can we trust Council when a simple roundabout project budgeted at $4.7 million (already high), then (as discovered from an Official Request response, LGOIMA 20009, Feb 2020) rises in cost to $15.5 million, and now in a Financial Committee report (June 2020, page 31), those costs appear to have blown out to a staggering $19.5 million? Yes $19.5 million. Where is the accountability and consequence? Why this massive budget blowout? Where is the community consultation given that this represents a significant tax burden? Unfortunately for all of you who read the news, these types of Council cost blowouts appear common place throughout the country. Yet instead of addressing this and other major contract and project management issues, the Council budget directed us all to discuss issues which essentially amount to tinkering around the edges.
But wait there is more; tragically. Not only will rates continue to shoot up, the 2020 Annual plan is now forecasting $900M in debt. The community were outraged 10 years ago when debt was planned to exceed $100 million. We are looking at NINE TIMES this debt with no plans to pay it back.
Don't blame COVID for the problems. From what we can see, these problems are related to poor decision making, poor accountability and a general lack of transparency. Where are the Cost Benefit analyses using industry standard Best practice for all major projects?
All we ask for in these uncertain times is what most businesses would take as given. A Zero Rate Increase and Zero-based budgeting, with the elimination of slush funds and full external review of Council finances. "Do It NOW”
Our submission identifies opportunities for significant savings and deferrals until a full review can be completed for the 2021 LTP. We are not against expansion projects, we just want to ensure accountability, transparency, and democracy in those decisions. The community has a lot to gain by the Council implementing industry standard cost benefit analysis for major projects and reviewing the technical outcome with alignment to current practise. I repeat, a Zero Rate Increase and Zero-based budgeting implemented across all of Council projects, and proper preparation for the impending recession.
Common core community values of transparency, integrity, democracy, accountability and expertise are being called into question. When I was young it was common to chat about the weather. Now those conversations are about the public’s loss of respect for politicians. We all need to ask, Why?
When someone criticises. You Should always consider the criticism accurate.
Hi everyone,
I'm working on a travel story for Stuff about the things that have surprised returning Kiwis about New Zealand. If you have recently returned from overseas or know someone who has, it would be great to hear about the things that have stood out for you, for better or for worse. … View moreHi everyone,
I'm working on a travel story for Stuff about the things that have surprised returning Kiwis about New Zealand. If you have recently returned from overseas or know someone who has, it would be great to hear about the things that have stood out for you, for better or for worse. Whether it's to do with the weather, the cost of things, the public transport, the food, the housing, the people or something else entirely, we'd be keen to hear about it. Please remember that your comment may be included in the article, unless you say you don't want it to be. Thank you.
Have you got a Kind Neighbour in your hood? We've teamed up with our mates at AMI to shout-out the good people up and down the country that have been nominated by others in their community. Get your shout outs in to our AMI Kind Neighbour Page and you and your nominee could win a $50 Prezzy® … View moreHave you got a Kind Neighbour in your hood? We've teamed up with our mates at AMI to shout-out the good people up and down the country that have been nominated by others in their community. Get your shout outs in to our AMI Kind Neighbour Page and you and your nominee could win a $50 Prezzy® Card AND a shout out in your local paper! Check out last weeks below ⬇️⬇️
"My neighbour Ann, a retired special ed teacher, goes the extra mile for her community. On her neighbourhood walks she notices blocked drains, or dangerous pavements on school routes and spends time phoning the Council to get them fixed. She is part of a local group that petitioned for new school crossings on Takanini School Road. She volunteers at the local school for free maths tuition. She sets a really great example of looking out for her community and makes the world a better place."
View Hamilton Harcourts' latest interactive Blueprint.
If you'd like to receive Blueprint in your inbox each week, subscribe here.
Traffic management will be in place along Anzac Parade near the Anzac Parade/Victoria St Bridge from 9am to 3pm on Thursday 16 July for tree pruning works.
The works, which include tree pruning and removal, will take place on the eastern corner of Anzac Parade and Memorial Dr across the road from … View moreTraffic management will be in place along Anzac Parade near the Anzac Parade/Victoria St Bridge from 9am to 3pm on Thursday 16 July for tree pruning works.
The works, which include tree pruning and removal, will take place on the eastern corner of Anzac Parade and Memorial Dr across the road from Waka Kotahi NZ Transport Agency. See the map for details.
FPP or STV?
Have you had your say on which voting system you think is best for our city? You could win a $100 Prezzy Card just by having your say.
Hi neighbours,
Think you know how old your dog is? Think again.
Multiplying by seven isn't accurate, a new study says. Researchers at the University of California San Diego School of Medicine and other leading health institutions across the country have now debunked that common belief.
… View moreHi neighbours,
Think you know how old your dog is? Think again.
Multiplying by seven isn't accurate, a new study says. Researchers at the University of California San Diego School of Medicine and other leading health institutions across the country have now debunked that common belief.
According to their findings, a one-year-old dog is similar to a 31-year-old human.
To read about the how to calculate our dog's age, click here
Hiya,
Wanting to buy a bird aviary. Any size, condition and price considered.
Please phone Don 027 2387666
You’ll need:
• Upholstery weight (ideally) fabric (Spotlight or your favourite store)
• Batting - I used an extra thick batting, be sure to get the width you need to cover your plywood or card
• Plywood or cardboard (local hardware shop or repurpose something lying around)
• Staple … View moreYou’ll need:
• Upholstery weight (ideally) fabric (Spotlight or your favourite store)
• Batting - I used an extra thick batting, be sure to get the width you need to cover your plywood or card
• Plywood or cardboard (local hardware shop or repurpose something lying around)
• Staple gun (& staples!)
• Heavy duty mirror/picture hanger (we recommend Hangman Heavy Duty Mirror and Picture Hanger from Mitre 10 but you can use whatever suits you!)
Step 1. After laying the batting out on my tabletop, I put my sheet of plywood on top. The size of your plywood will depend on the size of your bed. Wrap the batting around the plywood and start stapling it down with a staple gun. Just staple your way all around the board. Super easy.
Step 2. Once the batting was secured, I laid out the fabric with the patterned side down. I gave it a quick ironing to get out any wrinkles before starting. After placing my plywood on top of the fabric, it was time to start stapling the fabric. I started off by doing the two long sides. I made sure to pull it tightly as I was going so that it wouldn’t be too loose in the front.
The corners are the part you want to be careful with. My technique (and I’m not sure if this is the “right” way or not, but it worked) is to approach it like I was wrapping a present. I get one side stapled, and then fold it in to the un-stapled side. Then I bring that piece up and pull it really tightly and staple along the seam. It takes a bit of practice, but I would just do it a few times until I got the perfect seam and then staple ‘er down.
Step 3. Now came the tricky part of actually hanging it. We wanted to attach it directly to the wall rather than to our bed. We searched around and finally came across a Heavy duty mirror / picture hanger (Mitre 10, Bunnings probably has similar) Simply mount one track on mirror or picture, then install the wall track with included anchorless fasteners.
We’re really happy with how it turned out. The colours are just right and it’s nice to bring another textile into the room. Plus, it makes our basic bed look about a million times nicer and more expensive!
Full tutorial with pictures: diyshowoff.com...
One of the most scenic hot air balloon flights in the world - among the mountains in Queenstown - has slashed prices by a third to attract Kiwi travellers. Click the link below to read more.
Monthly AEA Worldwide Web events are held on the third Saturday (Greenwich Mean Time) of each month.
For July it is 8am on Sunday 19th (NZ time).
For newcomers interested in receiving a Zoom invitation for the event, please email aeawebevent@gmail.com.
Hi all.
Am trying to help a friend to get a Clothesline `fixed`.
Even if we would only be placing an intermediate pipe inside to keep it standing that would work for my friend.
Would anyone have a steel tube sitting on your house you don`t need? If so please let me know.
I think The broken pipe is … View moreHi all.
Am trying to help a friend to get a Clothesline `fixed`.
Even if we would only be placing an intermediate pipe inside to keep it standing that would work for my friend.
Would anyone have a steel tube sitting on your house you don`t need? If so please let me know.
I think The broken pipe is aprox 6-8cm diameter. Maybe a 4cm diameter would fit in. Any idea, anyone?
Hi Neighbours,
Get in quick! This week is your last week to grab yourself a bargain at your Red Cross Shop. Our school holiday deals are coming to end, so make sure you visit your Red Cross Shop and treat yourself to some pre-loved goods.
We are looking forward to seeing you!
Hi Waikato,
Would you pay $40 for a cheese toastie?
You might do if it came with a lobster tail sat between a golden Volare brioche, buffalo mozzarella, crayfish oil and crispy Vandy bacon crumbs.
The dish is just one of many over 30 Waikato's chefs have let their creative minds run wild … View moreHi Waikato,
Would you pay $40 for a cheese toastie?
You might do if it came with a lobster tail sat between a golden Volare brioche, buffalo mozzarella, crayfish oil and crispy Vandy bacon crumbs.
The dish is just one of many over 30 Waikato's chefs have let their creative minds run wild for during this year's Meyer Cheese Melt Challenge.
The competition, which sees a reimagining of the classic cheese toastie, is back for its second year and the entries are crazier than ever.
To read more about other toastie creations at this year's competition, click here
© Neighbourly 2024
Loading…
