How to Prevent Mouldy Curtains and Blinds
Why does mould appear in the first place?
Mould grows in damp areas where there is a food source such as dust, dirt or organic material. That’s why single glazed or drafty windows, where condensation and dust are common, are often a problem area.
What are some tips for preventing mould growth?
Clean soft furnishings regularly according to the manufacturer’s instructions. This usually involves a regular light vacuum, with less frequent dry cleaning or laundering. Regularly clean windows and wipe down window surrounds and venetian blinds or shutters with a mild detergent in warm water.
Does the material of the curtains affect how much mould will grow?
Yes, consider selecting window coverings manufactured from man-made materials, particularly in damp areas such as the bathroom, kitchen and on south-facing windows. It’s best to use a wipe-able, water-resistant blind or shutter in wet areas like bathrooms and kitchens. Even man-made fabrics don’t cope well in those environments.
How do I remove the mould?
Once mould develops it’s best to nip it in the bud as early as possible with a thorough clean. Some curtains can be hand washed (check the manufacturer’s instructions) but, for best results, we recommend taking them to a specialist cleaner. Curtain Clean services most of the North Island and takes care of all types of curtains and blinds.
Since moisture is the culprit, how can we minimise it in our homes?
- Use lids on pots and pans when cooking.
- Never hang clothes to dry inside and vent your clothes drier to the outside.
Keep reading: www.curtainclean.co.nz...
Driven On The Akatarawa Rd Lately?
If so, its good to know you are still alive and reading this.
We have a function to go to over Christmas up that way and having heard a few hairy stories about the road, I went up there on Thursday to check it out. The road's ok, narrow and winding, but not much worse than a Wellington hill suburb. What was pretty scary was the behavior of other drivers. Three vehicles heading the other way at speed would have crashed into me if I hadn't been pulled off the road. I had pulled in to check the address when a truck came flying past, taking up all of the narrow road at speed. There is no way the driver would have been able to stop had they come around the corner immediately in front of me. The other two drivers came hurtling past as I had turned in to turn around and come back down the hill. They were also driving at speed and taking up most of the road. Coming back down I passed another car coming up and estimate that the safe speed to pass another car was about 30-35 kms.p.h. So, now we're thinking, do we go to the function or not.? Feels a bit like we're taking our life in our hands going up there. Drivers appear to be overconfident, and they are courting serious injury.
Loading…