Thank you for using Neighbourly
If you enjoy growing your own potted plants and would like a stylish way of displaying them inside the home, then this month's project could be just what you need. I've been admiring living walls and hanging gardens for some time now, and decided to create an achievable small-scale … View moreIf you enjoy growing your own potted plants and would like a stylish way of displaying them inside the home, then this month's project could be just what you need. I've been admiring living walls and hanging gardens for some time now, and decided to create an achievable small-scale version to house small pots and fresh herbs in my kitchen. These shelves are affordable and easy to make, and ideal for apartments and smaller homes without much garden space.
For this project you will need:
• 1 length of untreated pine 20mm thick and 120mm wide
• Hand saw or skill saw, sandpaper
• Drill with 72mm hole saw drill bit and 7.5mm drill bit (for 7mm rope)
• 9 x 9cm terracotta pots
• White synthetic general purpose rope 7mm x 10m, 8 x white plastic cable ties
• Resene Colorwood Whitewash, speed brush or synthetic paintbrush
• Various herbs or small plants
Step one: Cut your length of pine into three pieces, each 600mm long. You can do this with either a hand saw or a skill saw. Once cut, give them a sand.
Step two: Measure out the placement of your holes that will hold the terracotta pots. I spaced mine out at 150mm centres. Repeat these markings for all three lengths of timber.
Step three: Using a drill with a hole saw attachment, cut out 72mm (D) sized holes to fit your terracotta pots. I practised first on a spare cut of timber I had lying around, to make sure that the hole I was drilling was the right size. For my 9cm pots, I found that 72mm ensured a good fit. Tidy up each hole with a light sand.
Step four: Now you need to cut the holes for your rope. Measure in 20mm from each corner and mark your drilling spot. Use a 7.5mm drill bit to make one hole in each corner (the size drill bit you use will depend on the thickness of the rope you are using to hang your shelves – adjust accordingly). Repeat for all three lengths of timber.
Step five: To achieve a fresh, clean look I used Resene Colorwood Whitewash interior wood stain. There are lots of colours to choose from, so you could pick whichever best suits the timber you are using and where the finished project will be hanging. I applied two coats of Whitewash using a speed brush, or synthetic brush.
Step six: Cut your rope into four equal lengths and thread each length through the corner holes of your shelves starting from the bottom. Tie each length of rope into a knot on the underside of the bottom shelf, so the bottom shelf rests on these knots.
Step seven: Adjust the placement of your shelves until you get them evenly spaced. Make sure you allow room for the pots to sit in the shelves, and room for your plants to grow of course. I spaced my shelves at 200mm apart. Secure the undersides of your remaining shelves with cable ties, they are a good solution because they aren't hugely visible and they don't budge. Trim the long ends of the cable ties once in place.
Step eight: Add your pots and plants, and hang in your chosen spot. Make sure that you use hooks that can safely take the weight of your shelves.
DIY with pictures: www.curtainclean.co.nz...
Join the movement to help make Aotearoa a better place to live!
Great for anyone wanting to undertake their own photo development. Also available a number of 35mm, SLR camera's.
Hi Neighbours, back to school has thrown your routine into chaos? HelloFresh has dinner sorted for you. With our +20 quick and easy recipes (covering a range of dietary needs with new ones added every week!), dinner time will become a delicious breeze🌿
With no lock-in contracts, you can … View moreHi Neighbours, back to school has thrown your routine into chaos? HelloFresh has dinner sorted for you. With our +20 quick and easy recipes (covering a range of dietary needs with new ones added every week!), dinner time will become a delicious breeze🌿
With no lock-in contracts, you can pause, skip or cancel your subscription at any time. You can also switch up your plan sizes and delivery times to suit your household and schedule.
Sign up today and get up to $100 off across your first 4 boxes with code “NEIGHBOUR”. All you need to do is cook!
Hi
Does any body have a metal storage cabinet for sale,like the sort in the photos below.
Dimension wise preferably about 1800 H x 900 W x450 D, but anything considered, thanks.
Ph Craig
0210438089
Are you aged 60+? If so, go to BookMyVaccine.nz now to reserve your spot to get the COVID-19 vaccination.
You can be vaccinated at any point from now – there’s no cut off.
Getting vaccinated is the best way to protect you and your whānau from COVID-19.
The stronger our immunity, the … View moreAre you aged 60+? If so, go to BookMyVaccine.nz now to reserve your spot to get the COVID-19 vaccination.
You can be vaccinated at any point from now – there’s no cut off.
Getting vaccinated is the best way to protect you and your whānau from COVID-19.
The stronger our immunity, the greater our possibilities.
Clothes Dryer wanted, or some one who can fix mine
We may be an official partner of the New Zealand Olympic Team, but within our villages it’s residents who are chasing Olympic glory.
So many Ryman residents have passions and pastimes that they continue to thrive at within our villages. Therefore, creating an event like Olympics@RYMAN is a prime… View moreWe may be an official partner of the New Zealand Olympic Team, but within our villages it’s residents who are chasing Olympic glory.
So many Ryman residents have passions and pastimes that they continue to thrive at within our villages. Therefore, creating an event like Olympics@RYMAN is a prime example of how we pioneer the way for our residents.
Events include swimming, bowls, cycling, relay walking and Quiznastics. To up the ante, we’ve incorporated technology solutions to enhance events and to enable residents to connect with all 41 Ryman villages, including those across the Tasman, while they compete!
Knowing how to make rope was once a critical skill for survival and self-sufficiency on the frontier. Early settlers were able to make rope from a variety of materials, but the main thing they used was hemp.
A rapid growing plant, hemp is perfect for making rope. Hemp grows fast. It produces up … View moreKnowing how to make rope was once a critical skill for survival and self-sufficiency on the frontier. Early settlers were able to make rope from a variety of materials, but the main thing they used was hemp.
A rapid growing plant, hemp is perfect for making rope. Hemp grows fast. It produces up to 75 tons of dry matter per acre per year. It thrives in poor soil, needs no fertilizers or pesticides to succeed, and gobbles up atmospheric CO2, stymieing the greenhouse effect. It produces more fibre per pound than either cotton or flax, and these fibres are easily extracted in order to make hemp rope, twine, or cord.
Hemp rope is easy to make. Some methods involve using a rope machine, but fortunately such an investment isn’t necessary to the process. All you really need is some hemp fibre or hemp twine, and a short piece of wooden dowel. Our hemp rope maker, available in our shop, will really streamline the process for you if you plan on making lots of hemp rope.
Step one: Separate the hemp fibres or unwind the hemp yarn and cut into lengths approximately twice as long as the desired length of the rope. Continue cutting until you have a bundle of fibres approximately half the size of the diameter of rope you’d like to make.
Step two: Grab the bundle of fibres and fold it in half, securing the fold by placing a dowel rod through the resultant loop and into the ground. Smooth the fibres of this bundle down by running your hand along the length of the cord.
Step three: Divide the bundle in two, holding half the fibres in your left hand and half the fibres in your right.
Step four: Twist each bundle clockwise until the cord you are creating begins to kink and loop. Pull as hard as you can while twisting.
Step five: Twist the two cords together, wrapping one over the other in a counter clockwise motion, to form a rope.
Step six: Secure the ends with overhand knots beginning with the end in your hands. Once the first end is tightly tied, slip the rope off the dowel rod and tie it as well.
To make a cable, repeat steps 2 through 6 and twist the two ropes together. This process can be repeated as many times as you like, making thicker, stronger cables as you go.
Enjoy making your own hemp rope! This technique can be used to make hemp twine, hemp cord. and hemp yarn as well. It all depends on the size of the fibres you start with. Need some ideas for what to do with your newly made hemp rope? Try using a piece as a clothesline, for air-drying your clothes. Make a hemp leash for your pet, or keep your hemp twine petite for use in jewellery making.
Making rope is a great way to be self-sufficient and eliminate the supply chain requirement. Everything you can make yourself is one less packaged product– in this case, one less coil of synthetic rope– that needs to be manufactured for you. Have fun!
FULL HOUSE. Items on account NZ Police. Insurance Company & NCC Items. Plus General Estate & Down Sizing Vendors.
Viewing Mon 8-5. Tue 8-6 & Wednesday from 8am
More Photos www.mafa.co.nz... & facebook
Hey Napier!
We have a great apprenticeship opportunity for you! Industrial Manufacturing Services Ltd are looking for a light fabrication apprentice to join their team. There is a fully equipped workshop with modern tooling and facilities along with service vehicles for field work.
The company… View moreHey Napier!
We have a great apprenticeship opportunity for you! Industrial Manufacturing Services Ltd are looking for a light fabrication apprentice to join their team. There is a fully equipped workshop with modern tooling and facilities along with service vehicles for field work.
The company strives to offer quality product and service to their clients and to uphold a strong reputation.
Want to work for a place like this? Find out more now!
Hi neighbours,
The Tokyo Olympics are about to kick off, and some of our country's best sports stars are set to represent New Zealand on the world stage.
The opening ceremony takes place on Friday (about 11pm NZ time), and the Games will run through until August 8.
Over the next … View moreHi neighbours,
The Tokyo Olympics are about to kick off, and some of our country's best sports stars are set to represent New Zealand on the world stage.
The opening ceremony takes place on Friday (about 11pm NZ time), and the Games will run through until August 8.
Over the next two-and-a-half weeks, some of the world’s best athletes competing in a range of sports will battle it out in Tokyo in the hopes of walking away with a medal.
So get your New Zealand flags and popcorn ready and sign up for our Tokyo Olympics newsletter to have all the highlights, talking points, medal tally and analysis delivered to your inbox every day. Click here.
We'll also be live blogging our Kiwi athletes' events every day of the Games. Just bookmark this page to stay up to date.
Low levels of digital literacy among staff is a challenge facing many manufacturing businesses, and strengthening those skills is not only essential to meet rapid technological changes in the workplace, it’s vital to increasing productivity.
“As technology progresses and we move further into… View moreLow levels of digital literacy among staff is a challenge facing many manufacturing businesses, and strengthening those skills is not only essential to meet rapid technological changes in the workplace, it’s vital to increasing productivity.
“As technology progresses and we move further into Industry 4.0, workers must be upskilled to keep pace with new systems and processes, especially older employees who are not digital natives, but who have invaluable experience in their fields,” says Competenz Sector Manager Jahn Vannisselroy
Competenz has developed a new micro-credential to meet the demands brought about by Industry 4.0.
Hi there!
Here at Trade Me we're chuffed to let you know we’ve launched our Kindness Store again for winter, supporting KidsCan and the great work they do making sure our tamariki have a fair start – after all, little Kiwis can’t learn when they’re hungry, wet, and cold.
We’ve… View moreHi there!
Here at Trade Me we're chuffed to let you know we’ve launched our Kindness Store again for winter, supporting KidsCan and the great work they do making sure our tamariki have a fair start – after all, little Kiwis can’t learn when they’re hungry, wet, and cold.
We’ve stocked the store with all the essentials. Think fleece-lined rain coats and shoes to keep kids warm and dry, and warm, healthy food.
Just pick, click, and give now – we take care of the rest, making sure your purchase gets to KidsCan.
Apply for a Defer-A-Bull purchase agreement today – a simple, cost effective solution when sourcing your dairy service bulls.
Secure your bull team early with no repayments until bulls are sold.
© Neighbourly 2024
Loading…
