Nearby
Woburn, Alicetown, Epuni, Hutt Central, Tirohanga, Harbour View, Maungaraki, Waterloo, Waiwhetu, Fairfield, Petone, Korokoro, Boulcott, Naenae, Takapu Valley, Belmont
Normandale news is brought to you by the team at The Hutt News
Recent posts
Thank you for using Neighbourly
Oil filled radiator- runs well .
On wheels so can be moved around. Pick up in Fairfield.
Window insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. … View moreWindow insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. They cost a fraction of the price of double glazing yet offer good performance in reducing heat loss and condensation in your home, as well as preventing your sills and window dressings from going mouldy. You can pick up a kit from your local Mitre 10 or Bunnings.
Window insulation film is only designed to last one season, but it may remain intact for several years if your windows are in good condition and the film is undisturbed. Just be aware that adhesive tape used on the film may leave a stain if you leave it on for longer than one season.
Tips for installing
Installing DIY window insulation film is relatively easy – you only need a pair of scissors and a hair dryer.
• Make sure your window frames are dry and the paint is in good condition to avoid condensation forming inside the air gap.
• For wooden windows, applying a bead of sealant like silicone along the glass edge will further reduce the risk of moisture creeping into the air gap.
• Make sure your window pane is clean and streak free before putting the insulation up.
Step 1: Clean the Window
Clean the window thoroughly with an ammonia-based window cleaner and wipe it dry using a squeegee. Make sure that all of the window cleaner is wiped off, as it will dissolve the adhesive on the window film.
Step 2: Wet the glass with a light spray of water and baby shampoo
Fill a spray bottle with water and add a couple of drops of baby shampoo. Spray the mixture onto the window. This mixture helps the film stick to the window but still lets you slide the film around so you can fit it properly into the corners before the mixture dries.
Step 3: Measure and trim the film to size
Measure the window to see how large an area you need to cover, allowing at least two centimetres overlap for all four sides. Roll the window film out onto a flat horizontal surface and trim to size. Before you put the film on the window, start peeling the backing off the sticky side of the film. Use masking tape on both sides of one corner to get the peeling started.
Step 4: Put the window film onto the window
Once you’ve peeled off the top five to ten centimetres of backing, move the film up to the surface of the window. Start by putting the top two corners in place. Once the film is sitting in a good position you can slowly start to take the rest of the backing off.
Step 5: Remove the backing from window film as you go
Slowly peel the backing off in stages. Use a squeegee to flatten the film out onto the window as you go. Start the squeegee in the centre of the window and push out to the edges. As you work down the window, use the spray bottle to keep the surface as moist as possible. It will give you a much smoother finish.
Step 6: Remove the air bubbles from the window film
Once the squeegee has got the larger bubbles out, use the small plastic scraper to remove any smaller bubbles. You can work out any small pockets of water at the same time. Whatever small amounts of moisture are left will work with the adhesive on the film to create a bond to the window.
Step 7: Give the window film a final trim
When all the bubbles are out, take a sharp blade and give the film a final trim at the edges of the window. Once you’ve trimmed the edges, give the film one final scrape with the small plastic scraper. Tuck the corners in as hard as you can, squeegeeing towards the outside, working out the last remnants of water.
They had a vision for their property, but they also had three floods in 20 years. That didn't stop them pursuing the garden of their dreams though.
Cashed-up boat buyers unable to travel are thought to be behind a spike in demand for berths that has resulted in a million-dollar expansion at a Lower Hutt marina.
Seaview Marina is putting the finishing touches on a $1.2 million 46-berth extension and has plans to install an additional 31 which … View moreCashed-up boat buyers unable to travel are thought to be behind a spike in demand for berths that has resulted in a million-dollar expansion at a Lower Hutt marina.
Seaview Marina is putting the finishing touches on a $1.2 million 46-berth extension and has plans to install an additional 31 which will allow the docks to hold more than 400 vessels.
Chief executive Alan McLellan says the marina is at capacity and a waiting list for spots has grown over the last couple of years.
McLellan said Seaview was the biggest marina in the region and the only one with the ability to expand. Once the new berths were built, there would be no room for more.
New Zealand’s lush green pastures and temperate climate means our country produces some of the world’s best beef.
New Zealand is one of McDonald’s top ten beef-producing markets and it’s such a hit with the rest of the world that a significant percentage of NZ’s beef exports are to … View moreNew Zealand’s lush green pastures and temperate climate means our country produces some of the world’s best beef.
New Zealand is one of McDonald’s top ten beef-producing markets and it’s such a hit with the rest of the world that a significant percentage of NZ’s beef exports are to international McDonald’s markets.
We partner with many Kiwi farmers who produce our beef, including Whangara Farms which was the first beef farm outside of Europe to be invited to the McDonald’s Flagship Farmers programme.
ANZCO Foods, based in the small Taranaki town of Waitara, are responsible for making our 100% beef patties. About 90% of the staff at the Waitara plant are locals and they manage to produce around half a million patties each day.
Our quality beef cuts are minced and that’s it. No additives or fillers, just mince that is formed in patties, before they’re flash-frozen and sent to restaurants.
Hand made scrunchies they are $3 each . Made by my daughter. Private message me for purchase.
Captain John was recently adopted by a family. Here is what they had to say.
"To the wonderful people at SPCA. On Tuesday, Captain John came home with us to his new furever home. Safe to say he has adjusted well and is loving his new life. He has discovered the confines of the kid’s bed.
He… View moreCaptain John was recently adopted by a family. Here is what they had to say.
"To the wonderful people at SPCA. On Tuesday, Captain John came home with us to his new furever home. Safe to say he has adjusted well and is loving his new life. He has discovered the confines of the kid’s bed.
He is completely calm with three kids and two dogs. Thank you for looking after him until he came to us."
Applications for grants to help private landowners protect indigenous plant and animal habitats on their land are now open.
There are two kinds of grant: one up to the value of $1000 to help cover the cost of materials, equipment or services for small-scale projects like weed and pest control, and… View moreApplications for grants to help private landowners protect indigenous plant and animal habitats on their land are now open.
There are two kinds of grant: one up to the value of $1000 to help cover the cost of materials, equipment or services for small-scale projects like weed and pest control, and a larger contribution of up to $20,000 for projects with a suitable project or property plan.
Big thanks to the Normandale Residents Committee and the Normandale Community for their support in paying this years subs and donating their Inorganic rubbish to the huge skips.
WONDERFUL meaning of COMMUNITY and fun.
DONE and DUSTED for 2021.
Hi Everyone
I am looking for a good quality butchers block to purchase. If anyone has any information where to buy or has one to sell please let me know.
best wishes
Jane
Hi neihgbours.Tomorrow morning I will have 5 boxes each of the above items.No holds fifs.Must pikup tomorrow.I have some in the Pataka now alongside cooking banana.
This week we feature a cat with the unlikely name Ned Kelly, who belongs to John Kelly from Carterton.
"Rehomed and renamed Ned Kelly. Every inch a rebel. Moved from the country into town, Carterton."
Remember if you want your pet featured on Neighbourly, email us on … View moreThis week we feature a cat with the unlikely name Ned Kelly, who belongs to John Kelly from Carterton.
"Rehomed and renamed Ned Kelly. Every inch a rebel. Moved from the country into town, Carterton."
Remember if you want your pet featured on Neighbourly, email us on yourpet@dompost.co.nz with a recent photo. Please remember to say what suburb you live in.
I have a largish section and am time poor.
It needs about 4-6 hours per week to keep it maintained.
Please PM if you are interested.
I have a largish section and am time poor.
It needs about 4-6 hours per week to keep it maintained.
Please PM if you are interested.
© Neighbourly 2024
Loading…
